Titan Cleaner Industry TCN-1AST32-A for cleaning aluminum, silumin, ZAM

🚨 Attention! Avoid contact of Titan Cleaner Industry TCN-1AST32-A with surfaces made of copper, brass and silver! 

Titan Cleaner Industry is a concentrated specialized detergent developed for effective cleaning of parts and equipment using ultrasonic baths.

This product was created by experts of Titan Technics LLC, who have many years of experience in the production of ultrasonic washers (baths), which ensures its perfect compatibility and maximum efficiency when working with ultrasonic equipment.

Key characteristics of Titan Cleaner Industry TCN-1AST32-A:

✅ Concentrate: Working concentration from 1:15 to 1:20 depending on the level of contamination.

✅ High efficiency:  Removes oxide films and corrosion, sooty and carbon deposits, mineral deposits, oil and grease contamination, paint and residues without residual traces.

✅ Versatility: Suitable for cleaning duralumin (2XXX series, Al-Cu), magnalium (Al-Mg, 5XXX series), aluminum–silicon alloys (4XXX, 6XXX, 7XXX series), silumin alloys (Al-Si, Al-Si-Cu), anodized aluminum.

✅ Cost-effectiveness: Optimal dilution ratios make it possible to significantly reduce cleaning costs.

✅ Technological compatibility: Perfect compatibility with ultrasonic equipment from Titan Technics LLC.

Types of contamination handled by Titan Cleaner detergent:

• 🌫 Oxide films and corrosion – effectively removes oxidation marks, rust and corrosion deposits that form on aluminum, magnesium and zinc alloys under the influence of moisture and chemicals.

• 🔥 Sooty and carbon deposits – dissolves and removes traces of soot, carbon deposits and combustion products that accumulate on engine parts, exhaust systems and thermally loaded surfaces.

• 💎 Mineral deposits – effectively removes salt and limescale deposits that form in contact with hard water, coolants and technical solutions.

• 🛢 Oil and grease contamination – dissolves residues of lubricants, technical fluids and greases deposited on the surfaces of aluminum and silumin parts.

• 🎨 Paint and construction residues – removes paint coatings, adhesive residues, cement film and construction mixtures without damaging the metal structure.
  
   

• ---

Areas of application:

1️⃣ Cleaning duralumin (2XXX series, Al-Cu) – effective removal of oxide films, corrosion deposits, sooty and carbon contaminants, mineral and oil deposits, as well as residues of paint and construction materials that accumulate on duralumin parts.

2️⃣ Cleaning magnalium (Al-Mg, 5XXX series) – elimination of corrosion products, oxide formations, residues of paint coatings, sooty deposits, oil and grease deposits that can affect the functionality of parts.

3️⃣ Cleaning aluminum–silicon alloys (4XXX, 6XXX, 7XXX series) – effective removal of mineral deposits, oxide films, oil and carbon contaminants that accumulate in internal channels, on mating surfaces and structural elements.

4️⃣ Cleaning silumin alloys (Al-Si, Al-Si-Cu) – removal of corrosion deposits, oxide and mineral contamination, sooty and oil residues that form on the surfaces of silumin parts during operation in harsh conditions.

5️⃣ Cleaning anodized aluminum – effective removal of oil and fuel residues, construction and paint materials, oxide films and corrosion deposits that can affect the performance of anodized parts and structures.

Materials suitable for cleaning:

✔ Duralumin (2XXX series, Al-Cu) – effectively removes oxide films, corrosion deposits, sooty and carbon residues, mineral contamination, oil and grease deposits, as well as traces of paint and construction materials.

✔ Magnalium (Al-Mg, 5XXX series) – eliminates corrosion products, oxide films, residues of paint coatings, oil deposits, carbon layers and mineral contamination that can affect the operation of parts.

✔ Aluminum–silicon alloys (4XXX, 6XXX, 7XXX series) – effectively clean from mineral and oil deposits, oxide films, corrosion formations, paint residues, as well as sooty and carbon contamination that accumulate in cavities and on working surfaces of parts.

✔ Silumin alloys (Al-Si, Al-Si-Cu) – remove oxide and mineral deposits, oil residues, corrosion layers, sooty and carbon formations, as well as construction and paint contamination from part surfaces.

✔ Anodized aluminum – effectively removes oil and grease deposits, corrosion, oxide films, traces of paint, construction material residues and carbon deposits while preserving the anodized coating and component functionality.

 

Materials not suitable for cleaning:

❌ Copper

❌ Brass

❌ Silver

Advantages of Titan Cleaner Industry TCN-1AST32-A:

🌟 Expert development: A unique formula created by our industrial chemistry specialists based on many years of experience and analysis of customer needs.

🛠 Testing and quality: The product has been tested in industrial conditions. Our clients and partners have confirmed its high quality and effectiveness in practice.

🌿 Environmental friendliness: Surfactants meet the biodegradability requirements in accordance with Regulation (EC) No 648/2004.

🔬 Safety: Suitable for cleaning duralumin (2XXX series, Al-Cu), magnalium (Al-Mg, 5XXX series), aluminum–silicon alloys (4XXX, 6XXX, 7XXX series), silumin alloys (Al-Si, Al-Si-Cu), anodized aluminum.

⚡ High efficiency: Removes oxide films and corrosion, sooty and carbon deposits, mineral deposits, oil and grease contamination, paint and residues without residual traces.

🔄 Long-lasting action: Ensures long-term cleanliness without frequent replacement of the solution (from 2 weeks to 1 month).

💰 Cost-effectiveness: Concentrate with optimal dilution ratios, which reduces cleaning costs.

Technical specifications:

📌 Model article: 100TCN-1AST32-A
📌 Brand: Titan Cleaner
📌 Series: Industry
📌 Processing time: 5–30 minutes
📌 Working concentration: 1:20
📌 Number of components: Single-component
📌 Composition: Concentrate, alkaline compounds and surfactants
📌 pH: 11.0–13.0
📌 Packaging: Drum
📌 Shelf life: 2 years unopened, up to 1 year after opening
📌 Application temperature: from +20°C to +60°C

Delivery time: 1–3 working days

Instructions for use:

1️⃣ Shake the product before use.

2️⃣ Dilute the concentrate in water (max. 1:20).

3️⃣ Fill the ultrasonic bath tank with the solution up to the mark or according to the manufacturer’s recommendations.

4️⃣ Switch on the device. For optimal results, use heating up to the recommended temperature.

5️⃣ Degas the solution (5–10 minutes or use the degassing function if available).

6️⃣ Place the parts to be cleaned in the bath. Run the bath for the recommended time.

7️⃣ Remove the cleaned parts and dry them.

Precautions:

⚠ Use protective goggles, gloves and a respirator.
⚠ Avoid contact with eyes. In case of contact, rinse with plenty of water.
⚠ Follow the company’s occupational safety instructions.
🔄 Solution disposal: Discharge into industrial sewage in accordance with environmental regulations.

Packaging:

📦Titan Cleaner Industry TCN-1AST32-A is available in packaging: 1 L, 5 L, 10 L, 20 L, 100 L, 200 L.

Titan Cleaner detergent range:

🟢 Home – concentration 1:1 – 1:3, suitable for household use.
📦 Packaging: 1 L, 2 L, 3 L, 5 L.

🟠 Business – concentration 1:7 – 1:10, suitable for production, service stations and enterprises.
📦 Packaging: 1 L, 2 L, 3 L, 5 L, 10 L.

🔴 Industry – concentration 1:15 – 1:20, for large industrial facilities.
📦 Packaging: 1 L, 5 L, 10 L, 20 L, 100 L, 200 L.

About the Titan Cleaner brand

Titan Technics LLC is a leading Ukrainian manufacturer of specialized detergents under the Titan Cleaner brand. Our many years of experience in the development of ultrasonic equipment, research in the field of detergents and close cooperation with customers have made it possible to create a range of high-quality specialized cleaners with a unique formulation.

🚀 Order Titan Cleaner Industry today and see for yourself its quality, proven by experts and customers!