Titan Cleaner Business TCB-1EP08-A for cleaning engine parts

🚨 Attention! Avoid contact of Titan Cleaner Business TCB-1EP08-A with aluminium surfaces and their alloys!

Titan Cleaner Business is a concentrated, specialized cleaning agent designed for effective cleaning of parts and equipment using ultrasonic baths.

This product was developed by experts of LLC “Titan Technics”, who have many years of experience in the production of ultrasonic cleaning machines (baths), which ensures its perfect compatibility and maximum efficiency when used with ultrasonic equipment.

Main characteristics of Titan Cleaner TCB-1EP08-A :

✅ Concentrate: Working concentration from 1:7 to 1:10 depending on the degree of contamination.

✅ High efficiency: Removes carbonised deposits, carbon deposits, oil deposits, corrosion, dust and dirt without residual traces.

✅ Versatility: Suitable for cleaning titanium, cast iron, stainless steel, polyethylene and polypropylene, polyamide (nylon), polyurethane, polycarbonate, nitrile rubber, silicone seals, EPDM rubber, control boards and powder coatings.

✅ Cost-effectiveness: Optimal dilution ratios allow a significant reduction in cleaning costs.

✅ Technological compatibility: Perfectly compatible with ultrasonic equipment from LLC “Titan Technics”.

Types of contamination removed by Titan Cleaner:

• 🔥 Carbonised deposits – dense carbon deposits formed as a result of high-temperature exposure on the surfaces of parts and equipment.

• ⚫ Carbon deposits – combustion residues that accumulate on the walls of combustion chambers, in exhaust systems, on injectors and other assemblies.

• 🛢 Oil deposits – contamination from engine, industrial and process oils, forming sticky, hard-to-remove layers.

• ⚙ Corrosion – oxide formations, rust and pitting of metal caused by moisture and aggressive media.

• 🌫 Dust and dirt – microscopic particles, residual metal shavings, dust deposits and other fine contaminants that accumulate on surfaces.

Areas of application:

1️⃣ Cleaning the piston group – removal of carbon, oil deposits and combustion residues from metal pistons, rings and connecting rods to preserve their operating characteristics.

2️⃣ Fuel system – cleaning metal injectors, fuel pumps and channels from deposits formed due to the use of low-quality fuel and long-term operation.

3️⃣ Cylinder head (CH) – removal of carbon deposits, engine oil residues and sealant remnants from valves, camshaft, combustion chambers and other components.

4️⃣ Lubrication system – cleaning oil channels, bearings and other parts from old lubricant, varnish and resinous deposits that impede normal oil circulation.

5️⃣ Exhaust system – removal of soot, fuel residues and corrosion deposits from catalytic converters, silencers, resonators and turbochargers.

6️⃣ Repair and maintenance – cleaning bolts, nuts, fasteners and threaded connections from corrosion, oxidation and contamination to facilitate disassembly and further operation.

Materials suitable for cleaning:

✔ Titanium – effective removal of oxides, corrosion spots, oil and technical contamination without damaging the surface.

✔ Cast iron – cleaning from carbon, combustion deposits, lubricant residues and rust that accumulate during operation.

✔ Stainless steel – removal of greases, corrosion contamination, oil deposits and oxide film without damaging the gloss and structure of the metal.

✔ Polyethylene and polypropylene – safe cleaning of plastic parts from dust, oils, greases and other technical contamination.

✔ Polyamide (nylon) – cleaning from lubricating oils, dust and technical contamination while maintaining mechanical strength and flexibility of the material.

✔ Polyurethane – removal of oil and industrial contamination without damaging the flexible structure of the material.

✔ Polycarbonate – cleaning surfaces from fingerprints, dust, scratches and technical contamination while preserving the transparency of the material.

✔ Nitrile rubber – removal of oil, fuel and technical deposits while maintaining elasticity and sealing properties.

✔ Silicone seals – cleaning from oils, dust, grease and industrial contamination while preserving flexibility and sealing performance.

✔ EPDM rubber – effective removal of dust, lubricating oils and other technical deposits without loss of elasticity.

✔ Control boards – safe cleaning of electronic boards from dust, film and contamination that may affect their conductivity and performance.

✔ Powder coating – cleaning from atmospheric, oil and technical contamination without damaging the decorative or protective layer.

Materials not suitable for cleaning:

❌ Aluminium and its alloys (ZAMAK, silumin, anodized aluminium)
❌ Silver

Advantages of Titan Cleaner Business TCB-1EP08-A :

🌟 Expert development: A unique formula created by our industrial chemistry specialists based on many years of experience and analysis of customer needs.

🛠 Testing and quality: The product has been tested under industrial conditions. Our clients and partners have confirmed its high quality and efficiency in practice.

🌿 Environmental friendliness: The surfactants comply with biodegradability requirements according to Regulation (EC) No 648/2004.

🔬 Safety: Cleans without damaging surfaces; suitable for cleaning titanium, cast iron, stainless steel, polyethylene and polypropylene, polyamide (nylon), polyurethane, polycarbonate, nitrile rubber, silicone seals, EPDM rubber, control boards and powder coatings.

⚡ High efficiency: Removes carbonised deposits, carbon deposits, oil deposits, corrosion, dust and dirt without residual traces.

🔄 Long-lasting action: Ensures long-term cleanliness without frequent replacement of the solution (from 2 weeks to 1 month).

💰 Cost-effectiveness: Concentrate with optimal dilution ratios, which reduces cleaning costs.

Technical specifications:

📌 Model article: 10TCB-1EP08-A
📌 Brand: Titan Cleaner
📌 Series: Business
📌 Processing time: 5–30 minutes
📌 Working concentration: 1:10
📌 Number of components: Single-component
📌 Composition: Concentrate, alkaline compounds and surfactants
📌 pH: 11.0–13.0
📌 Packaging: Canister, PET container
📌 Shelf life: In closed container – 2 years, in opened – up to 1 year
📌 Application temperature: from +20 °C to +60 °C

Delivery time: 1–3 working days

Instructions for use:

1️⃣ Shake the product before use.

2️⃣ Dilute the concentrate with water (max. 1:10).

3️⃣ Fill the tank of the ultrasonic bath with the solution up to the mark or according to the manufacturer’s recommendations.

4️⃣ Switch on the device. For optimal results, heat to the recommended temperature.

5️⃣ Degas the solution (5–10 minutes or use the degassing function, if available).

6️⃣ Place the parts to be cleaned. Run the bath for the recommended time.

7️⃣ Remove the cleaned parts and dry them.

Safety measures:

⚠ Use protective goggles, gloves and a respirator.
⚠ Avoid eye contact. In case of contact, rinse with plenty of water.
⚠ Observe your company’s occupational safety instructions.
🔄 Solution disposal: Discharge into industrial sewage in accordance with environmental regulations.

Packaging:

📦 Titan Cleaner Business TCB-1EP08-A is available in the following sizes: 1 l, 2 l, 3 l, 5 l, 10 l.

Titan Cleaner product range:

🟢 Home – concentration 1:1 to 1:3, suitable for household use.
📦 Packaging: 1 l, 2 l, 3 l, 5 l.

🟠 Business – concentration 1:7 to 1:10, suitable for production, service stations and enterprises.
📦 Packaging: 1 l, 2 l, 3 l, 5 l, 10 l.

🔴 Industry – concentration 1:15 to 1:20, for large-scale production.
📦 Packaging: 1 l, 5 l, 10 l, 20 l, 100 l, 200 l.

About the Titan Cleaner brand

LLC “Titan Technics” is a leading Ukrainian manufacturer of specialized cleaning agents under the Titan Cleaner brand. Our many years of experience in the development of ultrasonic equipment, research in the field of cleaning agents and close cooperation with customers have made it possible to create a range of high-quality specialized cleaners based on a unique formulation.

🚀 Order Titan Cleaner Business today and experience the quality proven by experts and customers!