Titan Cleaner Industry TCN-1F11-A for filter cleaning 

🚨 Attention! Avoid contact of Titan Cleaner Industry TCN-1F11-A with aluminium surfaces and their alloys!

Titan Cleaner Industry – a concentrated specialised detergent developed for the efficient cleaning of parts and equipment using ultrasonic baths.

This product was created by experts of LLC “Titan Technics”, who have many years of experience in the production of ultrasonic washers (baths), which ensures its perfect compatibility and maximum efficiency when working with ultrasonic equipment.

Key characteristics of Titan Cleaner TCN-1F11-A :

✅ Concentrate: Working concentration from 1:15 to 1:20 depending on the level of contamination.

✅ High efficiency: Removes residues of limescale, organic contaminants, oil and grease deposits, particles of sand and soil, corrosion, and fine dust without residual traces.

✅ Versatility: Suitable for cleaning stainless steel, cast iron, polycarbonate, polyethylene and polypropylene, polyurethane, polyamide (nylon), silicone seals, nitrile rubber (NBR), EPDM rubber, cellulose filter elements (air cleaning elements), filter elements made of fibreglass, carbon fibreglass, contamination sensors, fine‑mesh metal or plastic screens, and coarse mesh filters.

✅ Cost‑effectiveness: Optimal dilution ratios make it possible to significantly reduce cleaning costs.

✅ Technological compatibility: Perfect compatibility with ultrasonic equipment from LLC “Titan Technics”.

Types of contamination handled by Titan Cleaner:

• 💧 Limescale – mineral deposits formed as a result of hard water, which can accumulate on the surface of filters and reduce their efficiency. Titan Cleaner effectively dissolves calcium and magnesium deposits, restoring the normal operation of the system.

• 🍃 Organic contamination – residues of plant and animal matter, biological films and microbial deposits that can impair filtration quality. The special formula breaks down organic compounds, preventing the development of microorganisms.

• 🛢 Oil and grease deposits – sticky contamination arising from oils, lubricants and fats, which can hinder normal liquid flow through the filter. Titan Cleaner quickly dissolves and removes these deposits, restoring the filter’s initial permeability.

• 🪨 Sand and soil particles – small solid particles capable of clogging filter pores and reducing their efficiency. The product effectively removes sand and soil impurities, maintaining the optimal condition of filter elements.

• 🔩 Corrosion – oxidative processes that lead to the formation of rust and damage to metal filter elements. Titan Cleaner helps to minimise corrosion processes, extending the service life of the equipment.

• 🌫 Fine dust – very small dust particles that can settle on the filter and impair its performance. The product effectively removes even the finest contaminants, ensuring high system performance.

Areas of application:

1️⃣ Cleaning of ventilation system filters – removal of dust, fine particles, allergens and other contaminants that accumulate on ventilation filters, to ensure clean air and efficient operation of air‑conditioning systems.

2️⃣ Cleaning of water supply and heating system filters – effective removal of limescale, mineral deposits and organic contaminants that settle on filters, which improves water quality and increases the energy efficiency of equipment.

3️⃣ Cleaning of oil and grease filters – removal of oil, grease and lubricant residues that can lead to filter clogging and reduced performance.

4️⃣ Cleaning of industrial equipment filters – removal of contaminants such as fine dust and particles of organic matter formed during production, to ensure stable equipment operation.

5️⃣ Cleaning of cooling system filters – removal of limescale residues, dust and other contaminants from cooling system filters, which helps maintain optimal temperature and increases cooling efficiency.

6️⃣ Technical maintenance of filtration systems – regular cleaning of internal filter components (screens, frames, bolts and other connections) from dust, lubricant residues and corrosion, to extend the service life of the equipment.

Materials suitable for cleaning:

✔ Stainless steel – removal of fats, corrosion‑related contamination, oil deposits and oxide films without loss of gloss or structural integrity.

✔ Cast iron – effective removal of process, lubricant and dust contamination while maintaining the strength of the material.

✔ Polycarbonate – safe cleaning from dust, stains, scratches and contamination while maintaining transparency and optical properties.

✔ Polyethylene and polypropylene – removal of oil, grease and atmospheric contamination without compromising strength and flexibility of the material.

✔ Polyurethane – cleaning of organic and technical contamination while maintaining elasticity and resistance to mechanical impact.

✔ Polyamide (nylon) – removal of lubricants, dust and industrial contamination while preserving mechanical strength.

✔ Silicone seals – cleaning from oils, ink, glue and other contaminants without damaging the surface and while maintaining elastic properties.

✔ Nitrile rubber (NBR) – effective removal of fuel and oil deposits without affecting the flexibility and tightness of the material.

✔ EPDM rubber – cleaning from dust, lubricating oils and process contamination while maintaining elasticity and chemical resistance.

✔ Cellulose filter elements (automotive air filters, industrial dust filters) – removal of dust and contamination to ensure high filtration efficiency.

✔ Synthetic fibres (HEPA filters, filters for air and water purification) – cleaning from contamination while maintaining high microfiltration efficiency.

✔ Non‑woven materials (carbon filters, air cleaning elements) – removal of atmospheric and process contamination without damaging the structure.

✔ Fibreglass filter elements – cleaning from dust, organic and technical contamination while preserving structural integrity.

✔ Carbon fibreglass – effective removal of contamination while maintaining high sorption properties and material strength.

✔ Contamination sensors – delicate cleaning to ensure accurate readings without damaging sensitive electronic components.

✔ Fine‑mesh metal or plastic screens – cleaning from dust, lubricant and process deposits while maintaining mesh integrity and optimal filtration performance.

✔ Coarse mesh filters – removal of large dust particles, contamination and mechanical impurities to ensure effective filtration systems.

Materials not suitable for cleaning:

❌ Aluminium and its alloys (ZAM, silumin, anodised aluminium)
❌ Silver

Advantages of Titan Cleaner Industry TCN-1F11-A:

🌟 Expert development: A unique formula created by our industrial chemistry specialists, based on many years of experience and analysis of customer needs.

🛠 Testing and quality: The product has been tested under industrial conditions. Our clients and partners have confirmed its high quality and effectiveness in practice.

🌿 Environmental friendliness: The surfactants comply with the biodegradability requirements according to Regulation (EC) No 648/2004.

🔬 Safety: Suitable for cleaning stainless steel, cast iron, polycarbonate, polyethylene and polypropylene, polyurethane, polyamide (nylon), silicone seals, nitrile rubber (NBR), EPDM rubber, cellulose filter elements, fibreglass and carbon fibreglass filter elements, contamination sensors, fine‑mesh metal or plastic screens, and coarse mesh filters.

⚡ High efficiency: Removes residues of limescale, organic contamination, oil and grease deposits, particles of sand and soil, corrosion and fine dust without residual traces.

🔄 Long‑lasting action: Provides long‑term cleanliness without frequent replacement of the solution (from 2 weeks to 1 month).

💰 Cost‑efficiency: Concentrate with optimal dilution ratios, which reduces cleaning costs.

Technical specifications:

📌 Model article: 100TCN-1F11-A
📌 Brand: Titan Cleaner
📌 Series: Industry
📌 Processing time: 5–30 minutes
📌 Working concentration: 1:20
📌 Number of components: Single‑component
📌 Composition: Concentrate, alkaline compounds and surfactants
📌 pH: 11.0–13.0
📌 Packaging: Drum
📌 Shelf life: In closed condition – 2 years, opened – up to 1 year
📌 Application temperature: from +20 °C to +60 °C

Delivery time: 1–3 working days

Instructions for use:

1️⃣ Shake the product before use.

2️⃣ Dilute the concentrate in water (max. 1:20).

3️⃣ Fill the ultrasonic bath tank with the solution up to the mark or according to the manufacturer’s recommendations.

4️⃣ Switch on the device. For optimal results, use heating up to the recommended temperature.

5️⃣ Degas the solution (5–10 minutes or use the degas function, if available).

6️⃣ Place the parts to be cleaned into the bath. Run the bath for the recommended time.

7️⃣ Remove the cleaned parts and dry them.

Safety precautions:

⚠ Use safety goggles, gloves and a respirator.
⚠ Avoid contact with eyes. In case of contact, rinse with plenty of water.
⚠ Follow the occupational safety instructions of your company.
🔄 Solution disposal: Discharge into industrial sewerage in accordance with environmental regulations.

Packaging:

📦 Titan Cleaner Industry TCN-1F11-A is available in the following package sizes: 1 l, 5 l, 10 l, 20 l, 100 l, 200 l.

Titan Cleaner product range:

🟢 Home – concentration 1:1–1:3, suitable for household use.
📦 Packaging: 1 l, 2 l, 3 l, 5 l.

🟠 Business – concentration 1:7–1:10, suitable for production, service stations and enterprises.
📦 Packaging: 1 l, 2 l, 3 l, 5 l, 10 l.

🔴 Industry – concentration 1:15–1:20, for large industrial facilities.
📦 Packaging: 1 l, 5 l, 10 l, 20 l, 100 l, 200 l.

About the Titan Cleaner brand

LLC “Titan Technics” is a leading Ukrainian manufacturer of specialised cleaning agents under the Titan Cleaner brand. Our many years of experience in the development of ultrasonic equipment, research in the field of cleaning agents and close cooperation with customers have made it possible to create a range of high‑quality specialised cleaners based on a unique formulation.

🚀 Order Titan Cleaner Industry today and see the quality proven by experts and customers!