Titan Cleaner Industry TCN-1EP08-A for cleaning engine parts
🚨 Attention! Avoid contact of Titan Cleaner Industry TCN-1EP08-A with aluminium surfaces and their alloys!
Titan Cleaner Industry is a concentrated, specialized cleaning agent designed for the effective cleaning of parts and equipment using ultrasonic baths.
This product has been created by experts of LLC “Titan Technics”, who have many years of experience in manufacturing ultrasonic washers (baths), which ensures its perfect compatibility and maximum efficiency when working with ultrasonic equipment.
Main characteristics of Titan Cleaner TCN-1EP08-A :
✅ Concentrate: Working concentration from 1:15 to 1:20 depending on the level of contamination.
✅ High efficiency: Removes carbonised deposits, carbon build-up, oil deposits, corrosion, dust and dirt without residual traces.
✅ Versatility: Suitable for cleaning titanium, cast iron, stainless steel, polyethylene and polypropylene, polyamide (nylon), polyurethane, polycarbonate, nitrile rubber, silicone seals, EPDM rubber, control boards and powder coating.
✅ Cost-effectiveness: Optimal dilution ratios allow you to significantly reduce cleaning costs.
✅ Technological compatibility: Perfect compatibility with ultrasonic equipment from LLC “Titan Technics”.
Types of contamination removed by Titan Cleaner:
-
🔥 Carbonised deposits – dense carbon deposits formed as a result of high-temperature impact on the surfaces of parts and equipment.
-
⚫ Carbon deposits – combustion residues that accumulate on the walls of combustion chambers, in exhaust systems, on injectors and other components.
-
🛢 Oil deposits – contamination from engine, industrial and process oils, forming sticky and difficult-to-remove layers.
-
⚙ Corrosion – oxide formations, rust and pitting of metal occurring due to the influence of moisture and aggressive media.
-
🌫 Dust and dirt – microscopic particles, residual metal shavings, dust deposits and other fine contaminants that accumulate on surfaces.
Areas of application:
1️⃣ Cleaning of the piston group – removal of carbon, oil deposits and carbon residues from metal pistons, rings and connecting rods to preserve their performance characteristics.
2️⃣ Fuel system – cleaning metal injectors, fuel pumps and channels from deposits that form due to poor-quality fuel and long-term operation.
3️⃣ Cylinder head (CH) – removal of carbon deposits, engine oil residues and sealant remains from valves, camshaft, combustion chambers and other components.
4️⃣ Lubrication system – cleaning oil channels, bearings and other parts from old lubricant, varnish and resinous deposits that impede normal oil circulation.
5️⃣ Exhaust system – removal of soot, fuel residues and corrosion deposits from catalytic converters, silencers, resonators and turbochargers.
6️⃣ Repair and maintenance – cleaning bolts, nuts, fasteners and threaded connections from corrosion, oxidation and contamination to facilitate disassembly and further operation.
Materials suitable for cleaning:
✔ Titanium – effective removal of oxides, corrosion spots, oil and technical contamination without damaging the surface.
✔ Cast iron – cleaning from carbon, combustion deposits, lubricant residues and rust that accumulate during operation.
✔ Stainless steel – removal of greases, corrosion contamination, oil deposits and oxide film without damaging the shine and structure of the metal.
✔ Polyethylene and polypropylene – safe cleaning of plastic parts from dust, oils, greases and other technical contamination.
✔ Polyamide (nylon) – cleaning from lubricating oils, dust and technical contamination while retaining the mechanical strength and flexibility of the material.
✔ Polyurethane – removal of oil and industrial contamination without damaging the flexible structure of the material.
✔ Polycarbonate – cleaning surfaces from fingerprints, dust, scratches and technical contamination while preserving the transparency of the material.
✔ Nitrile rubber – removal of oil, fuel and technical deposits while maintaining elasticity and sealing properties.
✔ Silicone seals – cleaning from oils, dust, grease and industrial contamination while preserving flexibility and sealing properties.
✔ EPDM rubber – effective removal of dust, lubricating oils and other technical deposits without loss of elasticity.
✔ Control boards – safe cleaning of electronic boards from dust, film and contamination that can affect their conductivity and operation.
✔ Powder coating – cleaning from atmospheric, oil and technical contamination without damaging the decorative or protective layer.
Materials not suitable for cleaning:
❌ Aluminium and its alloys (ZAM, silumin, anodised aluminium)
❌ Silver
Advantages of Titan Cleaner Industry TCN-1EP08-A :
🌟 Expert development: A unique formula created by our industrial chemistry specialists based on many years of experience and analysis of customer needs.
🛠 Testing and quality: The product has been tested under industrial conditions. Our clients and partners have confirmed its high quality and effectiveness in practice.
🌿 Environmental friendliness: The surfactants comply with biodegradability requirements in accordance with Regulation (EC) No 648/2004.
🔬 Safety: Cleans without damaging surfaces; suitable for cleaning titanium, cast iron, stainless steel, polyethylene and polypropylene, polyamide (nylon), polyurethane, polycarbonate, nitrile rubber, silicone seals, EPDM rubber, control boards and powder coatings.
⚡ High efficiency: Removes carbonised deposits, carbon build-up, oil deposits, corrosion, dust and dirt without residual traces.
🔄 Long-lasting action: Provides long-term cleanliness without frequent replacement of the solution (from 2 weeks to 1 month).
💰 Cost-effectiveness: Concentrate with optimal dilution ratios, which reduces cleaning costs.
Technical specifications:
📌 Model article: 20TCN-1EP08-A
📌 Brand: Titan Cleaner
📌 Series: Industry
📌 Processing time: 5–30 minutes
📌 Working concentration: 1:20
📌 Number of components: Single-component
📌 Composition: Concentrate, alkaline compounds and surfactants
📌 pH: 11.0–13.0
📌 Packaging: Canister, PET container
📌 Shelf life: In closed condition – 2 years, opened – up to 1 year
📌 Application temperature: from +20 °C to +60 °C
Delivery time: 1–3 working days
Instructions for use:
1️⃣ Shake the product before use.
2️⃣ Dilute the concentrate in water (max. 1:20).
3️⃣ Fill the tank of the ultrasonic bath with the solution up to the mark or according to the manufacturer’s recommendations.
4️⃣ Switch on the device. For optimal results, use heating up to the recommended temperature.
5️⃣ Carry out degassing of the solution (5–10 minutes or use the degassing function if provided).
6️⃣ Place the parts to be cleaned. Run the bath for the recommended time.
7️⃣ Remove the cleaned parts and dry them.
Safety measures:
⚠ Use protective goggles, gloves and a respirator.
⚠ Avoid contact with eyes. In case of contact – rinse with plenty of water.
⚠ Follow the company’s occupational safety instructions.
🔄 Solution disposal: Discharge into industrial sewage in accordance with environmental regulations.
Packaging:
📦 Titan Cleaner Industry TCN-1EP08-A is available in the following packaging sizes: 1 l, 5 l, 10 l, 20 l, 100 l, 200 l.
Titan Cleaner product line:
🟢 Home – concentration 1:1 to 1:3, suitable for domestic use.
📦 Packaging: 1 l, 2 l, 3 l, 5 l.
🟠 Business – concentration 1:7 to 1:10, suitable for production, service stations and enterprises.
📦 Packaging: 1 l, 2 l, 3 l, 5 l, 10 l.
🔴 Industry – concentration 1:15 to 1:20, for large industrial facilities.
📦 Packaging: 1 l, 5 l, 10 l, 20 l, 100 l, 200 l.
About the Titan Cleaner brand
LLC “Titan Technics” is a leading Ukrainian manufacturer of specialized cleaning agents under the Titan Cleaner brand. Our many years of experience in the development of ultrasonic equipment, research in the field of cleaning agents and close cooperation with customers have made it possible to create a range of high-quality specialized cleaners based on a unique formulation.
🚀 Order Titan Cleaner Industry today and see for yourself the quality proven by experts and customers!
