Titan Cleaner Industry TCN-1MVE30-A for motorcycle and bicycle cleaning 

🚨 Attention! Avoid contact of Titan Cleaner Industry TCN-1MVE30-A with surfaces made of copper, brass and silver! 

Titan Cleaner Industry is a concentrated specialized cleaning agent designed for effective cleaning of parts and equipment using ultrasonic baths.

This product was created by experts of Titan Technics LLC, who have many years of experience in the production of ultrasonic washers (baths), which ensures its perfect compatibility and maximum efficiency when working with ultrasonic equipment.

Key features of Titan Cleaner Industry TCN-1MVE30-A:

✅ Concentrate: Working concentration from 1:15 to 1:20 depending on the level of contamination.

✅ High efficiency:  Removes dust and dirt, oil deposits, corrosion and rust, biological contamination, soot and burnt-on residues without residual traces.  

✅ Versatility: Suitable for cleaning duralumin (2XXX series, Al-Cu), magnalium (Al-Mg, 5XXX series), aluminum–silicon alloys (4XXX, 6XXX, 7XXX series), silumin alloys (Al-Si, Al-Si-Cu), and anodized aluminum.

✅ Cost-effectiveness: Optimal dilution ratios allow you to significantly reduce cleaning costs.

✅ Technological compatibility: Perfectly compatible with ultrasonic equipment from Titan Technics LLC.

Types of contamination that Titan Cleaner can handle:

• 🌀 Dust and dirt – effectively removes road dust, sand, mud and other mechanical contamination that accumulates on motorcycle and bicycle surfaces.

• 🛢 Oil deposits – dissolves and removes residues of lubricants, technical fluids and greases that settle on moving parts and assemblies.

• ⚙️ Corrosion and rust – removes oxidation marks, rust and corrosion deposits that occur on aluminum and magnesium alloys under the influence of moisture and aggressive environments.

• 🦠 Biological contamination – removes insect residues, organic deposits, algae and microbiological films that form during outdoor operation.

• 🔥 Soot and burnt-on residues – effectively cleans exhaust system and engine parts from combustion products, soot and deposits that reduce the efficiency of the units.
  
   

• ---

Areas of application:

1️⃣ Cleaning duralumin (2XXX series, Al-Cu) – effective removal of dust and dirt, oil deposits, corrosion and rust, biological contamination, soot and burnt-on residues that accumulate on parts and frames of motorcycles and bicycles.

2️⃣ Cleaning magnalium (Al-Mg, 5XXX series) – removal of oil and fuel residues, dust deposits, corrosion films and biological contamination that can affect the functionality and durability of the equipment components.

3️⃣ Cleaning aluminum–silicon alloys (4XXX, 6XXX, 7XXX series) – effective cleaning from dust, mechanical particles, oil and technical deposits that can settle on frames, brake systems and other structural elements.

4️⃣ Cleaning silumin alloys (Al-Si, Al-Si-Cu) – removal of corrosion, dust, mechanical and biological contamination, lubricant residues and soot that can form on engine parts, chains and suspension components.

5️⃣ Cleaning anodized aluminum – effective removal of oil deposits, dust, rust and soot that affect the operation of moving elements and the surfaces of anodized frames and parts of motorcycles and bicycles.

Materials suitable for cleaning:

✔ Duralumin (2XXX series, Al-Cu) – effectively removes dust and dirt, oil deposits, corrosion and rust, biological contamination, soot and burnt-on residues that accumulate on motorcycle and bicycle parts.

✔ Magnalium (Al-Mg, 5XXX series) – removes oxidation marks, dust and biological contamination, oil and technical deposits that may affect the functionality of the frame, suspension and other structural elements.

✔ Aluminum–silicon alloys (4XXX, 6XXX, 7XXX series) – effectively clean from dust, mechanical particles, oil contamination, corrosion deposits and burnt-on residues that can accumulate on engine parts, braking systems and chains.

✔ Silumin alloys (Al-Si, Al-Si-Cu) – remove dust and biological contamination, oil and fuel residues, rust that accumulates on the inner and outer surfaces of motorcycles and bicycles.

✔ Anodized aluminum – effectively removes dust and dirt, corrosion residues, oil deposits and soot marks, preventing a decrease in the functionality of parts and surfaces of motorcycles and bicycles.

Materials not suitable for cleaning:

❌ Copper

❌ Brass

❌ Silver

Advantages of Titan Cleaner Industry TCN-1MVE30-A:

🌟 Expert development: A unique formula created by our industrial chemistry specialists based on many years of experience and analysis of customer needs.

🛠 Testing and quality: The product has been tested under industrial conditions. Our clients and partners have confirmed its high quality and efficiency in practice.

🌿 Environmental friendliness: Surfactants meet the biodegradability requirements in accordance with Regulation (EC) No 648/2004.

🔬 Safety: Suitable for cleaning duralumin (2XXX series, Al-Cu), magnalium (Al-Mg, 5XXX series), aluminum–silicon alloys (4XXX, 6XXX, 7XXX series), silumin alloys (Al-Si, Al-Si-Cu), and anodized aluminum.

⚡ High efficiency: Removes dust and dirt, oil deposits, corrosion and rust, biological contamination, soot and burnt-on residues without residual traces.

🔄 Long-lasting effect: Provides long-term cleanliness without frequent replacement of the solution (from 2 weeks to 1 month).

💰 Cost-effectiveness: Concentrate with optimal dilution ratios, which reduces cleaning costs.

Technical specifications:

📌 Model article: 200TCN-1MVE30-A
📌 Brand: Titan Cleaner
📌 Series: Industry
📌 Processing time: 5–30 minutes
📌 Working concentration: 1:20
📌 Number of components: Single-component
📌 Composition: Concentrate, alkaline compounds and surfactants
📌 pH: 11.0–13.0
📌 Packaging: Drum
📌 Shelf life: 2 years unopened, up to 1 year after opening
📌 Application temperature: from +20°C to +60°C

Delivery time: 1–3 working days

Instructions for use:

1️⃣ Shake the product before use.

2️⃣ Dilute the concentrate in water (max. 1:20).

3️⃣ Fill the ultrasonic bath tank with the solution up to the mark or according to the manufacturer’s recommendations.

4️⃣ Switch on the device. For optimal results, use heating up to the recommended temperature.

5️⃣ Degas the solution (5–10 minutes or use the degassing function if available).

6️⃣ Place the parts to be cleaned in the bath. Run the bath for the recommended time.

7️⃣ Remove the cleaned parts and dry them.

Precautions:

⚠ Use protective goggles, gloves and a respirator.
⚠ Avoid contact with eyes. In case of contact, rinse with plenty of water.
⚠ Follow your company’s occupational safety instructions.
🔄 Solution disposal: Discharge into industrial sewage in accordance with environmental regulations.

Packaging:

📦Titan Cleaner Industry TCN-1MVE30-A is available in 1 L, 5 L, 10 L, 20 L, 100 L and 200 L packages.

Titan Cleaner product range:

🟢 Home – concentration 1:1 – 1:3, suitable for household use.
📦 Packaging: 1 L, 2 L, 3 L, 5 L.

🟠 Business – concentration 1:7 – 1:10, suitable for production, service stations and enterprises.
📦 Packaging: 1 L, 2 L, 3 L, 5 L, 10 L.

🔴 Industry – concentration 1:15 – 1:20, for large industrial facilities.
📦 Packaging: 1 L, 5 L, 10 L, 20 L, 100 L, 200 L.

About the Titan Cleaner brand

Titan Technics LLC is a leading Ukrainian manufacturer of specialized cleaning agents under the Titan Cleaner brand. Our many years of experience in the development of ultrasonic equipment, research in the field of cleaning agents and close cooperation with customers have made it possible to create a range of high-quality specialized cleaners with a unique formulation.

🚀 Order Titan Cleaner Industry today and experience its quality, proven by experts and customers!